Base Ends Above Bottom option

The option to place the ends above the bottom was added to the following cabinets :-

Tall Wall Oven
Tall Wall Oven Drawer
Tall Micro Pantry
Tall Micro Pantry Drawer

At Cabinet level, it can be found on the Cabinet Details > Ends page in the Options group box

The property used for the checkbox is FloorCarcassEndsPositionBottom and can be targeted by a Catalog Cleanup if required.

Oven Recess and Rails

Some ovens are designed to sit proud of the rails at the front and have a flange that butts up against the rail.

The following options allow the oven to be moved forward and/or the rail back.

Oven page

Offset (Backward) : Oven Model

When a 3D Model is used, then an option to Offset (Backward) is made available, allowing you to recess the oven, as shown.

Oven Section page

Offset (Backward) : Oven Rails

Rails are controlled from the Oven Section page.

Some ovens are designed to sit proud of the rails at the front and have a flange that butts up against the rail. So these options allow the oven to be moved forward and/or the rail back.