CM-Cabinets Library User Guide
At Cabinet level, in the Labour & Construction > Micro Box page of the Tall Wall Oven and Tall Wall Oven Drawer cabinets, there is the option to include a microwave box above the oven section which can be customised in a variety of ways.
click on the area of interest. 
This is where you specify the overall size of the microwave box.
Add Microwave Box
Controls whether the microwave box is present in the cabinet or not.
- Enabling this will add the microwave box.
- Disabling it will remove the microwave box and disable the rest of the options on the page.
Height
The opening height of the microwave box.
Depth
The internal depth of the microwave box.
Full Depth - Sets the depth of the microwave box to match the overall cabinet depth. Enabling this will disable the Depth field.
Total Depth - Displays the current overall internal depth of the microwave box.
Flush With Doors
Extends the front of the microwave box to become flush with the doors of the cabinet. Enabling this will disable the Incl Recess field.
Incl Recess
Applies a recess to the front of the microwave box.
This is where you control which parts to include for the microwave box, as well as gaps and recesses for those parts.
Division
Adds a vertical division to the microwave box and makes the following options available.
Gap - The distance from the end of the microwave box to the division.
From Left/Right - Specifies whether the Gap for the division is measuring from the left or right end of the microwave box.
Left End / Right End
When ticked, these checkboxes add a left end and/or right end to the microwave box.
Top
Adds a top to the microwave box and makes the following options available.
Top Vent - Applies a recess to the back of the top piece of the microwave box.
Rail - Adds a front rail to the top of the microwave box.
Back
Adds a back to the microwave box.
Additional Back Hgt - Extends the back of the microwave box upwards.
Bottom
Adds a bottom to the microwave box.
This is where you can add a pocket door to cover the microwave box, and control the door gaps for that pocket door.
Add Pocket Door
Adds a pocket door over the microwave box.
Gaps
Top - Applies a gap to the top of the pocket door.
Left - Applies a gap to the left side of the pocket door.
Right - Applies a gap to the right side of the pocket door.
Bottom - Applies a gap to the bottom of the pocket door.
Inset Pocket Door
Adds a recess to the pocket door to sit internally within the microwave box.
This is where you can add a microwave inside the microwave box, and control the size of that microwave.
Add Microwave Unit
Adds a microwave unit inside the microwave box for display purposes in the 3D and Elevation views.
Width
The width of the microwave unit.
Height
The height of the microwave unit.
Depth
The depth of the microwave unit.