Applying a Pullout

To apply a pullout system to cabinet you will need to ...

On the Cabinet Details > Area 1 page, set the Content to Pullout System from drop list.
- Note that an extra Pullout System category is made available.

On the Doors > Div Doors page, turn off the 'Include' option.
- This will remove the doors.

On the Pullout System > Options page, select the Brand from the drop list.
- Note the Pullout Options are currently limited but will be added to in the near future.
- Use the Display Opening slider to view the pullout.

Options page

Brand

The brand of pullout system to use.

The list is controlled by the subfolders in the <your CabMaster folder>\Table\Hardware\Pullout Systems\ folder.

Model

The model of pullout system to use.

The list is populated by the table inside the brand folder e.g. 'Table\Hardware\pullout systems\Hafele\Hafele-Pullout.qlt'

The current height, width and depth of the area are displayed below the selection.

Warnings will be displayed if the current area size does not conform to the maxamin/minimum sizes specified in the table, showing how much the depth/width/height needs to change.

Reload

Reload table button re-reads the information from the currently selected pullout system, in case the content of the .qlt file has changed.

Opening slider

The Opening slider controls how far the pullout system opens in 3d view.

Front page

Include Front

Ticking this check box adds a front panel to the pullout system door.

Door Gaps

The gap applied to each side of the front panel.

Assumed Thicknesses

These are used to calculate how much the front panel needs to overlap the parts surrounding the pullout system.

Angle Door Back

Adds machining angle to the corresponding side of the front.

Material - Door page

Generic material options for the front panel.

Handles page

Generic handle options for the front panel.

Pullout Tables

The following explains the table layout.

Rows

Name of Pullout Models

Columns

Column Heading	Detail
Folder	The name of the folders containing the machining tables and models for the pullout system
ModelStatic	The name of the 3d model used for the static part of the pullout system i.e. the part that remains inside the cabinet when system is pulled out. Model path is relative to Bitmap\Hardware\Pullout Systems\~Brand~\~Folder~\ Where ~Brand~ is the brand of the current pullout system and ~Folder~ is the folder specified in the folder column.
ModelMoving	The name of the 3d model used for the moving part of the pullout system i.e. the part that slides out of the cabinet. Model path is relative to Bitmap\Hardware\Pullout Systems\~Brand~\~Folder~\ Where ~Brand~ is the brand of the current pullout system and ~Folder~ is the folder specified in the folder column.
IncludeFront	Controls whether a front panel is added by default when selecting the pullout system.
PartNo	The part number of the pullout system for reporting.
Style	The style of the pullout system for reporting.
Brand	The brand of the pullout system for reporting.
Cost	The price of the pullout system for reporting.
MaxHeight	The Maximum height of the container for the pullout system.
MinHeight	The Minimum height of the container for the pullout system.
MaxWidth	The Maximum width of the container for the pullout system.
MinWidth	The Minimum width of the container for the pullout system.
MaxDepth	The Maximum depth of the container for the pullout system.
MinDepth	The Minimum depth of the container for the pullout system.
StaticModelWidth	The width of the Static model for the pullout system. Only used if ModelAnchorX is also being used.
StaticModelHeight	The height of the Static model for the pullout system. Only used if ModelAnchorZ is also being used.
StaticModelDepth	The depth of the Static model for the pullout system. Only used if ModelAnchorY is also being used.
StaticModelAnchorX	The left/right anchor point for the Static model of the pullout system. Can be set to Left, Right or None. (None will set the model to be full width)
StaticModelAnchorY	The front/back anchor point for the Static model of the pullout system. Can be set to Front, Back or None. (None will set the model to be full depth)
StaticModelAnchorZ	The top/bottom anchor point for the Static model of the pullout system. Can be set to Top, Bottom or None. (None will set the model to be full height)
StaticModelGapLeft	The gap applied to the Left side of the Static model.
StaticModelGapRight	The gap applied to the Right side of the Static model.
StaticModelGapTop	The gap applied to the Top side of the Static model.
StaticModelGapBottom	The gap applied to the Bottom side of the Static model.
StaticModelGapFront	The gap applied to the Front side of the Static model.
StaticModelGapBack	The gap applied to the Back side of the Static model.
MovingModelGapLeft	The gap applied to the Left side of the Moving model.
MovingModelGapRight	The gap applied to the Right side of the Moving model.
MovingModelGapTop	The gap applied to the Top side of the Moving model.
MovingModelGapBottom	The gap applied to the Bottom side of the Moving model.
MovingModelGapFront	The gap applied to the Front side of the Moving model.
MovingModelGapBack	The gap applied to the Back side of the Moving model.

Universal Cabinets

Understanding Universal Cabinets