New Features

V11.101.1.1

• Drawer box parts now support horizontal boring for construction holes

V11.101.1.0  

• Ability to export Special Cutouts to Custom Tables
• Add Pullout Systems to Universal Cabinets
• Update Machining Part Names to be more dynamic and integrate better with breadcrumb bar

Bug Fixes

V11.101.2.0

• Standard drawer right end sideholes were applying to wrong side
• End panel as door was missing a friendly part name for new machine view list

V11.101.1.2

• UBO cabinets were missing image and bottom rail when 'include stiles' is disabled
• Material-based markup prices were applied incorrectly when using 'lookup current price'
• Stylised Quote report now uses the report logo selected in drawing properties
• Hardware reports were showing double for hardware added to some corner cabinets
• End Panels were showing extra lines on plan
• Drawers with Tongue and Groove construction were showing an extra machine view list entry

V11.101.1.1

• Shaker door page was not displaying properly for Pullout Systems
• Selecting DoorMaster-LT Series 2 Style 3 was locking machining for all door profiles
• Floor Rear Corner Left cabinet missing filler
• Continuous adjustable shelf holes missing on one side of End Left in Universal cabinets when using vertically centred shelf holes

V11.101.1.0

• Crashing when trying to save unlicensed DoorMaster-LT profiles
• Kickboard Angled and Angled Cabinets erroring
• Finish reports were displaying the word CUT in them
• Door list RDL reports grouping incorrectly
• Shadow Rails: Support Rail position not always correct
• Floor UBO : Support rail machining orientation sometimes incorrect
• Floor Division: No adj shelf holes in EnR
• Sell price sometimes not loading properly when using price schedule
• Tall Universal: Drawer Right Gap not working when using Split configuration
• Vanity Sink Cabinet: Left hand door handle wont move
• Metal Standard Sink Drawer not showing in hardware reports
• Tall Blind Return Right Split edging controls not applying correctly to upper front
• Floor 45Deg Ends: BSolid not outputting B8 layer detail
• End Panels: Display option to 'Fill' not working
• Floor Universal reset buttons changing to 'Tall' construction methods
• Drawer components as Panel: not changing thickness
• Carcass parts as panel not always reporting correctly as 'Panel' or 'Carcass'
• Shadow Rail Extrusions: Unnecessary Edge material drop-list
• Drawer Bank: Machining Export errors using Metal Standard or Metal Premium with BSolid
• Tall Standard: Continuous adjustable holes missing from front left when pipe chase is on and in the left corner.
• Wall Microwave 2: Division holes incorrectly positioned
• Floor Drawer: Shadow rail option still present for removed drawer fronts
• Double Rail option sometimes not showing in Shaker and ShakerV profiles
• Floor UBO : Support Rails radio buttons not displaying correctly
• CM-Parts : Rail erroring when loading materials page
• Corner Cabinets: Tongue sometimes incorrectly sized when using different depths for main and extn
• Fillers: Not showing in 3D machining view when using Panel as Door
• CM-Parts : Door - JPull Defaults for Tall Door incorrect
• Floor Corner: Rail holes misaligned when set flat and reversed
• CM-Parts: Back - Left Edge Label is not sizing correctly
• CM-Parts : Rail - Missing one of the edge labels
• Universal Cabinets: Shadow rail overlaps incorrect
• 6th face machining: End Panels as door using incorrect machined face for back
• RDL reports erroring when trying to report on either Corner Kickboard or Universal cabinets with hanging rails
• Corner Drawers: Extra board component in Extn of Base section
• Remove unused options from Mach.General→Tools