CM-Cabinets Library User Guide
In this topic, we will discuss some of the features of shelves available with universal cabinets.
It is recommended to remove the doors to provided a clearer view for designing purposes.
Do this by unticking the Include option on the Doors > Div Door page.
On the Cabinet Details > Area 1 page, change the Content to Shelves, as shown.
On the A1L1:Shelves > Shelf Options page, the spacing dimensions are provided.
Gap: Is the distance set at either side of the adjustable shelf e.g. 1mm
Hole Qty: Sets the quantity of holes per shelf (can be any +ve number). For no holes, enter -1. For continuous holes, enter 0.
Continuous Holes: Be aware that the Spacing of holes (as well as the start and end point) is set on the Mach.Shelf/Mullion > General Shelf page of the Drawing Properties and even if you change the Height from Shelf Below, it will not readjust the hole spacing.
Example of Continuous holes
In this example, you can see that the shelf has moved (from 545mm to 552mm) but the holes remain in the same position.
The hole spacing is set at 32mm and the Top/Bottom gap is set to 150mm (Click on image).
Click to Expand
To adjust the Spacing use the options on the Cabinet Machining > Shelf Adj page.
To adjust the Top/Bottom gap use the options on the Cabinet Machining > Shelf Adj+ page.
Cabinet Machining > Shelf Adjustments
Shelf Slots are a machine line that can be set up in EzyNest, using a bullnose or an endmill tool, to cut a slot in the bottom of the shelf that sits over the shelf pin.
Profile drop lists allow you to change the shape of the shelf.
