V11.050.1.1

New Features

• Ability to Remove vanity panel from drawing properties.
• Ability to place Tall Wall Oven (and Drawer) Ends Above Bottom in the cabinet.
• KickBoard Standard: to have separate Rebates for left and right end rebates. 
• Sidebar can now be customised.
• Pre-Milling: Now per type and as edge thickness.
• Wall Standard : 3 Door Hinging to have option of independent hinging
• Wall Fridge Cabinet: to be able to extend back left and right.
• Tall Wall Ovens: Option to remove microwave unit independently of micro box.
• Shadow Rails removing physical rail at drawing properties
• Ability to add a front panel to an undermount rangehood in the Wall Rangehood cabinet.
• Templates: Add Revision and image selector
• Drawer Cabinets: Option to include gaps when using Advanced Drawer Front Configuration

Bug Fixes

• Drawers: Cam Cleanup
• Floor Angled Display: Errors on Placement
• Reports: Add Page To Select Image for Reports
• Tall Wall Oven Drawer: Remove unused lower handle options from door handles page
• Universal door: Applying both regular and lift hinges when hinging from top
• Universal cabinets lift hinge: Hinge block visual issue
• Reports: Drawer runner positions have too many decimal positions
• Universal Cabinets: Bottom piece split when 'Divisions extended to floor' is enabled without divisions present
• Universals: Drawers using CAM construction in Tall category also applying Floor Drawer construction
• Drawers: Cammed Sides requires drilling from inside face for cams
• Universal Cabinets: Shelf Pos + Div Length not completely sizing from thickness in local properties
• Bar Back Panels: Oversize width still applying when using 'export as one panel'
• Floor End Panel: overridden door edge material
• CM-Parts Rail: Cam holes repeating in wrong direction when using Vertical orientation
• Leg Hole positions: Incorrect when no kick present
• Floor Drawer Door: remove physical shadow rail behaviour inconsistent
• Bar Back Standard: left half stiles not resetting when un ticking 'export as one panel'
• Drawing Properties: Materials-Advanced Door and Panel material selection not sorted alphabetically
• Material Tags: Not applying to CM-Parts Door
• Tall Blind Return: Void to wall visible in 3d
• Floor 45 Deg Ends: Single line tool path for tongues not working
• Layers Table EditForm : Not showing Add/Del
• Material Tags: Local properties override not working correctly for wall or tall cabinets
• Kickboard Standard: Extend left or right kick face not working with full depth ends
• Standard lift hinges: not holding hinge position correctly
• Floor DrwDoor: shadow rail door overlap of door option applying to drawer as well
• Corner Cabinets: Still showing bi fold door swing when using 'Overlap Doors'
• Polyshape: Edging errors when exporting machining
• Tall Split Return: Can't override default construction setting for uppermost section.
• Curved panel: Door gaps & placement sidebar still showing controls that do not apply to the panel
• Floor Corner No Extn and No Main: non equal depths misbehaving
• Splay Cabinets : Error on placement
• Wardrobe Hanging: Ends do not have construction machining
• Window: Frame colour not able to select
• Board Reports: add edging thickness and Comment
• Vanity Rail: Support Rail error concerning 'MachCreatOpp'
• Shadow Rail : Support Rail error concerning 'MachCreatOpp'
• Tall Return Split Left and Right : Upper shelf hole quantity
• Floor Universal and Multi: Vertical division's double division won't change material
• Tall Beverage (and Drawer): Error on placement
• Floor Drawer Cabinets: Shadow SawCuts on a full door front enabling on removed fronts
• Drawer Cabinets: When the Top shadow rail is turned off then on it remains off
• Floor Drawers: Add Door option has an incorrect action
• Floor Multi: Drawer Front Heights on some configurations incorrect
• Floor Universal: Glass Door is incorrectly applied to Drawer fronts
• Drawer Spacer Rails: Ability to line up with Drawer Runners
• Floor Drawer Door: Default Drawer height incorrect when Shadow rail used
• Drawing Properties: Door edging checkboxes no longer greyed out
• Updated Build Number System
• Material Data to be stored in Arrays instead of Pipe separated strings
• Cabinet Based Material Refresh not always updating data
• Incorrectly Set MatXData Properties
• Tall Wall Ovens: Micro box parts still showing in Machine View List when microwave unit removed
• Tall Wall Oven/Micro Pantry: Shadow Rails Overlapping External Panels
• Drawing Properties: Spelling mistake on Mach. General -> Const page
• SectionLibraryFolder is hard coded in several parts
• Floor Standard and Wall Standard : When Independent hinging using RLLR overlaps two of the mullions
• Shadow Rail: Press Out or Cut Out - incorrect sizing when edging the top of ends.
• Splashback and Universal Benchtop: Move Material name to component DimName1
• Floor Micro Drawer and Floor UBO Drawer: Error on placement concerning "PartThick[Bnk]"
• Universals and Robes: Incorrect default values for MachCreateOpp[DvR] and MachCreateOpp[MuR]
• Universal Cabinets: Drawer fronts receiving construction holes when using 0mm gap behind drawer fronts
• Tall Blind Return Left: Pipe Chase in corner not applying cut out to End Left
• Bench Cabinets: Switching between 'Fixed' and 'Off Bench' height causing recursion errors
• Vanity Cabinets: Pipe chase cut outs not applying to shelves
• Floor Corner: T&G with 2-part machining removes the border of the Bottom part
• Kickboard Corner: Reducing height of back only applies to one side
• Drawer sections: Cleanup EdgeRecessBottom answers
• Benchtop: Substrate Edging Image incorrect
• RobeImport Benchtop: Error on Template and Substrate Material Reset & Refresh
• Drawer Runner Sets: Incorrect drawer selection when using Shadow Rails
• Floor Universal: Benchtop seal sides check boxes not working
• Floor Universal: Unable to snap to benchtop
• Sinks: Cut Outs not showing on plan
• Wall Wine Display: Add loose shelf/bottom option greyed out when removing bottom
• Vanity Drawer and Door: Left division not updating material thickness
• Floor Corner Filler: Top picking up Rail thickness but Top Material name
• Door Master LT Update from Build 44
• Ends as Panel: Causes Errors on Carcass Material Page
• Benchtop: Substrate Material saved as overridden
• Barback corner: Missing Shaker properties causing missing panels
• BackBack Corner: Panel selection should grey out when using all as one panel
• Benchtop & Benchtop Corner: Error on Template and Substrate Material Reset & Refresh and Benchtop Material Reset
• Standard Drawers: Tongue and Groove does not support single line Tongue
• Vanity Filler: Panel cutting list error
• Properties SideBar: Add Customisation and Extra fields
• Drawer Front: Issues With CMParts Drawers and Universals
• Drawer Cabinets: Resets inconsistent
• Drawers Cabinets: Top drawer incorrectly positioned when removing lower drawers
• Parts Library Drawers: Errors when using shadow rails (FrontHeight1)
• CM-Parts Grid: Not working with pricing.
• Bulkhead cabinet: Shadow edging page edge selection issue
• DoorMaster LT: Vein clearance offset not being reset when switching between certain door styles
• Tall angled walk in pantry: Text Edge Errors
• Missing XML Files

 V11.050.1.2

Bug Fixes

• Wall Universal: incorrect heights and part positions when using 'Off Bench' height
• Shelf Standard, Angled, Corner, Decor, Wardrobe Shelf and Hanging: Error on placement

V11.050.1.3

Bug Fixes

• Materials Manager : "LabourTableFolder" edit was dropdown instead of edit
• Floor Sink: Angled door backs not listening to drawing properties
• Vanity Drawer: Missing Door Gaps on SideBar

V11.050.1.4

Bug Fixes

• Wall Universal: Incorrect door position when using non-default height

V11.050.2.0→V11.050.2.3

• Rates in materials were not being stored between drawings
• Evenly spaced universal hinges were not machining
• Errors on placement on 1 door cabinets