With the release of the V11.1 application, we have implemented a new build numbering system. Click here to see the explanation of how it works.

New Features

V11.100.2.0

• Pocket tools can now be offset independently from profile tools in DoorMaster-LT profiles
• Added option to extend pocket toolpaths past the outside of the door in DoorMaster-LT profiles with raised profiles

V11.100.1.0

• Added Cabinet Cutouts
• Added Timber Panelling cabinets
• Added option to change machined face in Polyshape
• Added option to import points from timber panelling cabinet in Polyshape
• Added option to remove original border when using offset in Polyshape
• Added option to change spacing method for bar back panels
• Added part dimensions as selectable fields for QR codes on labels
• Added option to specify which face of doors custom tables apply to when using 6th face machining
• Added Double Rail option for shaker doors
• Added checkbox to view machining pages in drawing properties for non-machining users
• Added reset button to job number page
• Added individual drawer front control for Series 4 Style 6 DoorMaster-LT profiles
• Added separate V Line controls for Ends and Backs in Corner Drawer 2 cabinets

Bug Fixes

V11.100.2.2

• Some DoorMaster-LT profiles were not saving correctly

V11.100.2.1

• Universals with split ends producing too many parts

V11.100.2.0

• Add default cutout oversize to cabinet cutouts
• Negative prices on RDL reports now show negative symbol
• Fix pricing schedule erroring when changing through drawing properties drop-list (since V11.100.1.0)
• Left side of standard drawers in Universal cabinet no longer mirrored
• Hardware now links to hardware packs correctly
• RDL reports now use correct contact name when overridden
• Improve DoorMaster-LT compatibility with certain region/language settings
• Improve behaviour of Series 4 Style 6 DoorMaster-LT profiles on the side of sloped doors

V11.100.1.0

• Fix incorrect number of decimal places on hardware reports
• Fix errors when changing drawer quantity in Corner Drawer cabinets
• Profile machining no longer mirrored on sloped cabinets
• Improve drawer front behaviour in sloped cabinets
• Quote RDL reports now exclude non-cabinet items when cost is $0.00
• Fix custom tables and special cutouts not applying to doors when using a door profile
• Fix incorrect dimensions on Board List By Cabinet RDL reports
• Bulkhead cabinets now able to select door type material
• Bulkhead cabinets now use correct properties in dimensions sidebar
• Insertion point radio buttons no longer greyed out in cabinet friendly pages
• Fixed part sizing when using a pipe chase in the corner of Vanity cabinets
• Add missing filler panel edging checkboxes to Tall Split Return cabinets
• Extra shelf in Tall Broom cabinets now moves correctly
• Fix incorrect panel thickness in Tall Wall Oven cabinets
• Corner Cabinets now remove finger pull handles correctly when using the 'Remove Handles' checkbox
• Individual edge control for Series 4 Style 6 DoorMaster-LT profile now works correctly when using both upper and lower doors in Tall Standard cabinets
• Fix shaker rails sometimes not lining up between doors in 2 door cabinets
• Fix hardware pack editor erroring
• Universal drawer parts now export correctly to BSolid
• Fix Profile face of 'Panel As Door' panels ignoring oversize settings
• Fix errors when using 'Carcass As Panel' in Floor Dishwasher cabinet
• Fix errors when donating to opposite face in CM-Parts Shelf
• Wall Standard and Tall Standard cabinets now use the 'Behind Gap' correctly when using 'Carcass Flush With Doors'
• Ends of Wine Rack cabinets now apply custom tables correctly
• Vanity Sink cabinet now uses correct kickboard height
• Fix Door Profile checkboxes not applying to individual drawer fronts correctly in DrwDoor cabinets
• Fix door swings with 2x2 drawer bank and 'Use Full Door for Drawer Fronts' in DrwDoor cabinets
• Fix division height in DrwDoor cabinets
• Vanity panel now reduces in width when using 'Ends Flush With Door' in vanity cabinets
• Bottom shadow rail is now added correctly in the Vanity Sink Drawer cabinet
• Vanity Panel material page now shows correct material when switching to 'Other' material
• Added missing continuous shelf holes in upper area of Tall Split Return cabinets
• Remove adjustable shelf holes from upper fixed shelf in Tall Split Return cabinets
• 'Gap Between Cabinet and Wall' now applies to all sections of Tall Split Return cabinets
• Hinge plate holes are now applied correctly in all sections of Tall Split Return cabinets
• Removed cam holes from kick face in Universal cabinets
• Hinge cups and plates now line up correctly in Tall Split Drawer cabinets when not using 'Evenly Space Hinges'
• Fix errors on placement for Wardrobe Combo cabinet
• Fix shelf position in Floor UBO 3 and Floor UBO Drawer with certain configurations
• Improve behaviour of Micro Box Height in Micro Drawer cabinet when adjusting drawer gaps
• Shadow rails now display with the correct orientation in 3D when using 'Flat' configuration
• Edging controls now apply to front panel of Wall Rangehood cabinets
• Tongue and groove now aligns correctly between back and division in Vanity Drawer and Door cabinets
• Fix edging preview image for backs on friendly pages to correctly show which number controls left and right
• Edge lengths now report correctly in standard drawer sides
• Cleats are now added for both upper and lower rails in Double Hanging areas of Universal Cabinets
• Fix errors on placement for Bench cabinets
• Removed extra shadow rail machine view entry when removing certain drawer fronts
• Metal standard and metal premium sink drawers no longer stuck on cam construction method
• End Right parts now use correct plan colour when using fill options
• Kick Fascias now use correct material name for reporting