CM-Cabinets Library User Guide
Links to relevant topics have been added to assist in locating more detailed information.
- Lighting Valance : Cabinet Machining pages added (new to v12.001.1.0)
- Labour Cost Pricing : Ability to add markup per item (DescCost table based)
DoorMaster LT
- Series 3 Profiles - Ability to offset the pocket from the outer profile
- Default profile for the door type (Tall, Wall or Floor) can be chosen from the 4 selected job profiles.
My Setup
- Material DataSources : 'Use' options quantity increased (now 15)
- Local Properties : 'Definition' options quantity increased (now 25)
- Report Properties : 'Definition' options quantity increased (now 25)
- Dates Properties : 'Definition' options quantity increased (now 25)
The 'Use' and 'Use Definitions' check boxes must be enabled (ticked) before they are visible as applicable.Materials-Advanced
- Manager : Materials Inspector added
Hardware
- Increased items per cabinet (now 10 Accessory & 20 Construction)
- Managers : Pricing Markup per Hardware Item available
- a column named Markup is required in the relevant Hardware Table (Click on image in example to view)
Example
Click to view Form and associated Table
- The DescCost table can have up to 25 rows (increased from 12) which can all be used for costing labour 'By Cabinet'
- 'By Part' costing is unchanged (uses only the first 12 rows).
- Profile Doors : Multiple Styles per drawing (selectable for each Cabinet door)
Example - click image to view Floor Cabinet with 2 styles of door
Click to view affect on cabinet doors
- Shaker Profiles - Variable height Upper Rail available
Example 1
Click to Expand
Example 2
Click to Expand
- Pricing - Labour Table Folder Override
Reports
- Other page added (previously just on Legacy Reports)
My Extensions
- Plug-Ins - Additional buttons available (now 10)
Example
This example shows four buttons but up to 10 available
- Lighting Valance : New cabinet added to library. See Insert Unused BasedOns
Example
Click to Expand - Note Machining added v12.001.2.0
- Universals and Robes : Verticals - Ability to Mitre and Shape Verticals and add Rails
- Universals and Robes : Verticals - Ability to add Bottom and Top parts
- Universals and Robes : Verticals - Custom and Special Cutout machining added
Example - click image to view Shape and Rails pages
Click to view Shape and Rails pages and examples
- DrawerBanks : Dimensioning of individual Drawer Fronts
Example
- Cabinet Parts : Local Properties - ability to add a reportable Comment for each part.
Example of Cabinet Local Properties
This is accessed by pressing the button on the General Settings page of the cabinet.
Example of Report - click image to view options required in Drawing Properties
Click to view Reports > Board page of Drawing Properties for relevant option
- Angled Cabinets : Pipe Chase in corner with gap to wall caused back to size incorrectly
- Bench Micro Cabinets : Micro Box parts thickness incorrect
- Corner Cabinets : Pipe Chase in corner with gap to wall caused back to size incorrectly
- Division Cabinets : Mullion properties could error
- Floor Sink Undermount : Cabinet Machining page missing
- Handle Pricing : Item (table) based Markups were not included in cost
- Lighting Valance : Flush with doors errors
- Lighting Valance : Hinge Page removed
- Return Cabinets : Incorrect depth of Mullion cutout for shelf with carcass front present
- Roller Frames : Not showing in 3D when cut from one piece
DoorMaster LT
- End Panel - issues with machining when oversized
- Series 3 Style 6 - Cabinet Door cabinet was applying machining to wrong edges
- Series 4 profiles - 'Through Veins' were using the wrong depth
- Series 4 & 5 Profiles - Incorrect machined depth of veins within pocket
- Wall Cabinet - Door and panel issues when inbuilt fillers where oversized
RDL Reports
- Board reports could miss data
- Item (table) based markup amount not reported correctly
- Quantities - Cost was including individual item markup
Universals and Robes
- Pullout Front sizing not always correct
CM-Design-2
- Some Photoview models incorrectly sized
- Benchtop : Substrate - 3D View of cutout incorrect
- Benchtop : Substrate - Edge Markers not present
- Cabinet Door : Tall Door Profile missing Mid Rail
- Door Grain Markers : Issues with markers after rotation on cabinet
- DrawerBanks : Drawer Front splitter too prominent
- DrawerBanks : Handle holes not drilling when no profile
- Kickboard : Cam construction missing holes
- Pantry Shelves : Style 3 - Inconsistent Left and Right depths
- Tall Return Split (Left and Right) : Incorrect Gap between Top Shelf and Carcass
- Vanity Drawer and Door: Vanity Panel extending even when set to zero
- Wardrobe Combo : Remove Drawer handles not working
Floor
- Floor 45 Deg Ends : Square End variation missing hinges
- Floor Corner : Duplicate drilling of Rail holes
- Floor Dishwasher : Profiles not applied to all drawers
- Floor Returns : Angled Door Back defaults missing
- Floor Return Left : Mullion offset along with Doors (gap behind door)
- Floor Sink (Butler & Undermount) : Bench connectors present when not required
DoorMaster LT
- 3D issues with some profiles e.g. Series 3 Style2
- Edge Profile incorrectly positioned when Panel Scribed
- Profile face machining contained Angled Back steps
- Mid Rail not showing in 3D or machining
- Pricing - Override Price not working
RDL Reports
- Imperial - Format odd Cabinet dimensions was always 0.1234"
- Imperial - Fractions not always simplified
- Imperial - Material Thickness units showing 'mm'
Universals and Robes
- Cell Doors - missing middle Left hinge
- Doors - Bottom Horizontal Hinge issues
- Drawers - Incorrect Drawer Set displayed
- Drawers - Reporting Edging incorrectly
- Grid - Shelf Rebate option incorrect
- Imported Area pages - Machining drop list greyed out
- Incorrect Shadow Rail cutout on Double Division
- Leaving Double Division On when Vertical Divisions Off
- Shelves - Angled Shelf Cams not lining up
- Issues with mixing Cam ad Screw machining
CM-Parts Library
- Shelf Corner - Edging issues
- Shelf - End Construction holes machining donation
CM-Robes Library
- Furn Floor Drawer Dbl : RunnerMap[99] missing, causing errors
- Furn Tall Drawer - Adding a second upper door causing error
